High-Performance Oil Separator for Refrigeration Systems with Multiple Applicative Refrigerants

• Customization: Available
• Structure: Fixed
• Usage: Oil and Gas Separation
• Model NO.: F-5603
• Type: Return Filter
• Mechanical Principle: Condensation Method
• Performance: Sophisticated Filters
• Design Pressure: 2.9MPa
• Applicative Refrigerants: R134A.R22.R407c.R404A.R507A
• Oil Outlet: 3/8"
• First Oil Charge: 0.9L
• Joint Size: 7/8"
• Transport Package: Carton Box or Plywood Box Packaging
• Specification: valume: 5.0
• Trademark: OF
• Origin: China

Product Description

Product Description

 

The refrigerant gas, laden with oil in aerosol form, emerges from the compressor and enters the oil separator. Inside, the oil is meticulously intercepted as it traverses through a series of inlet and outlet metal webs, along with the shell wall. This intricate process causes oil particles to collide and coalesce into heavier droplets. These heavier droplets eventually descend, striking the separator wall, facilitating the final separation. The isolated droplets collect at the bottom, where a float-operated needle valve efficiently returns the oil to the crankcase or oil reservoir.
Δ The design pressure: 2.9MPa
Δ Applicative refrigerants: R22, R134a, R407C, R404A, R507A

Detailed Photos

 

 

 

Product Parameters

When using the oil separator for the first time, please ensure to fill it with lubricating oil identical to that in the compressor. Refer to the marked numbers above for accurate oil charging volume.

F-56 Series Refrigerating Capacity Table

 

 

 

Based on the above data: condensing temperature +40ºC, exhaust temperature +80ºC

Product Drawing

 

 

Packaging & Shipping

 

package size	160*424*140
package gross net	15KG
lead time	7 days (1 - 50 Pieces) To be negotiated ( > 50 Pieces)

 

Company Profile

 

 

 

FAQ

 

Q1: Are you a factory or a trading company?
A1: We operate our own state-of-the-art factory, ensuring the highest standards of quality and innovation.

Q2: Is a sample available?
A2: Yes, samples are available upon request. Please note, however, that the cost will be borne by you.

Q3: How can I place the order?
A3: To place an order, kindly provide the following details: the temperature of the medium passing through the fan (-40~+40ºC), materials for the air duct, bracket, and protective net, the protective grade of the net, and any specific frequency and voltage requirements. Additionally, confirm the impeller blowing direction (front blowing: wind direction from motor to impeller; back blowing: wind direction from impeller to motor) during the order process.

Q4:About transportation
A4: We offer a range of shipping methods, including express, air, and sea. You may choose your preferred shipping company or rely on our trusted forwarders. We ensure full tracking of your cargo until it reaches your doorstep.

Q5: After-sales service
A5: We provide exceptional after-sales service. Our dedicated team is committed to addressing any concerns you may have to ensure the seamless operation of our products.